Prepare CDR Report with us for Electrical Engineers – A Complete CDR Sample from our Professionals.

CDR Report Format for Electrical Engineers

Are you an electrical engineer and tired of searching for the CDR Report Format for Electrical Engineers?

Electrical engineering is a major branch of engineering that deals with studying and using electromagnetics and electricity. Electrical Engineers from overseas who want to further their careers in Australia must undergo a CDR assessment by Engineers Australia for the employment code: ANZSCO 233311. Engineers with a four-year Bachelor’s degree in Electrical Engineering are eligible to apply for the position of Electrical Engineer.

Skill Level

Level 1 or Equivalent 

A bachelor’s degree or higher level of education is required for most occupations in this unit group. The formal qualification may be replaced by at least five years of relevant experience and applicable vendor certification. In some cases, in addition to the official qualification, appropriate experience and on-the-job training may be necessary (ANZSCO Skill Level 1).


  • Electrical Design Engineer
  • Railway Signaling Engineer
  • Signaling and Communications Engineer

Skills Assessment Authority

EA( Engineers Australia)

Visa Provision

It is possible to apply for any of the visas in the General Skilled Migration (GSM) Program since the occupation is listed on the MLTSSL as an occupation in demand in Australia. Skilled Independent Subclass 189, Skilled Nominated Subclass 190, and Skilled Work Regional Subclass 491 are among the visas available in this category. If you have a definite offer of employment, you can also apply for various employer-sponsored visas.

Tasks to Perform

  1. Power plants and power production equipment are planned and designed.
  2. deciding the kind and configuration of circuits, transformers, circuit-breakers, transmission lines, and other equipment producing electric motors, components, equipment, and appliances
  3. interpreting electric power equipment and usage specifications, drawings, norms, and regulations
  4. setting delivery and installation schedules for machines, switchgear, cables, and fittings planning and managing resources utilized in the provision of electrical components, machines, appliances, and equipment

CDR Format for Electrical Engineer

Curriculum Vitae, Three Career Episodes, Continuing Professional Development, and a Summary Statement are all included in the Competency Demonstration Report Sample for Electrical Engineers. The following is the content of the CDR Report Sample:

 Curriculum Vitae

Engineers Australia will be impressed by a well-crafted and written Curriculum Vitae that comprises a simple summary of educational background, work experience, accomplishments, goals, and certifications. If you want assistance, we are here to guide you through creating a professional resume.

Continuing Professional Development Sample

Continuing professional development is the practice of keeping your EA assessors informed about your engineering career’s recent advancement. CPD will take into account all of the skills and information you’ve acquired during your academic career. CPD serves as a link between all of your methods, concepts, and strategies for personal development in the field of engineering. Continuing Professional Development can help you expand your professional networks and contacts while also gaining professional recognition. CPD is an important part of your CDR report since it reflects all of your skills in your stated engineering sector.

Electrical Engineer Career Episode Report Sample: 1

2080 words on “MATLAB Simulation of Solar PV Array and Pumped Hydro Plant.” The author’s tasks included:

  1. MATLAB is used to create solar photovoltaic modules.
  2. The simulation was used to investigate the system’s output characteristics.
  3. MATLAB is used to design hydropower plants.
  4. Simulations are being used to investigate the properties of hydropower.
  5. To investigate the properties of characteristic curves and the impact of changing external variables such as temperature and irradiation on them.
  6. To investigate the behavior of PV modules while they are partially shaded.

Electrical Engineer Career Episode Report Sample: 2

“Master Plan and Feasibility Study on Power Distribution System Extension and Reinforcement in Canon Valley—a total of 2100 words on the project—had the following roles and responsibilities:

  1. To determine the state of the Electricity Authority’s energy transmission in the valley.
  2. To solve the difficulties associated with power transmission
  3. To comprehend the difficulties that lead to the lossless transmission difficulty
  4. To investigate and propose improvements to the current system to decrease losses.
  5. To make the best possible use of the available resources in the context of electricity distribution.

Electrical Engineer Career Episode Report Sample: 3

2100-word paper on “Optimal Allocation of Static and Dynamic Reactive Power Support for Enhancing Power System Security.” His tasks and duties were as follows:

  1. Develop a method for identifying severe contingencies and susceptible buses so that voltage-prone regions in the network may be identified and reactive power support provided.
  2. To determine the severity and type of the voltage issue.
  3. Develop an approach for identifying optimum locations that are less complicated in terms of integer (location) optimization.
  4. Develop a system for assigning static and dynamic VAR sources for a single contingency in the most efficient way possible.
  5. Develop a low-complexity approach for distributing static and dynamic VAR sources appropriately for numerous severe situations that are assessed simultaneously.

Electrical Engineer Summary Statement Sample

1120 words for a thorough description of all the competence aspects. Your key engineering talents, as well as your managerial characteristics, are highlighted in the summary statement. For your EA assessor, your summary statement should be prepared in an easy-to-understand style. It’s written in a tabular format, with the competency features highlighted, and it should be tightly linked to the CDR episodes. Three career episodes illustrating an applicant’s engineering activities are required. The summary statement is a report that is written after a career episode.

Once you’ve completed all three parts of the career episode, you’ll need to assess them to make sure you’ve covered all of the competency components for the chosen occupational category. The Summary Statement will represent the evaluation’s outcome.

Leave a Reply

Your email address will not be published. Required fields are marked *