CDR Report Sample for Engineering Technologist 233914
Having Trouble Writing your CDR Report ?
Get in Touch with Our Writers to get the Help you Need and Avoid Possible Rejection!
Or talk to our writers at +61 481 614 316 / +61 483 968 416
Engineering Technologist: ANZSCO 233914
An Engineering Technologist is an expert prepared in specific parts of the advancement and execution of an individual innovation region. Building innovation instruction is significantly more applied and less hypothetical than designing training. However, from an expansive perspective, both have an emphasis on functional application. Building technologists frequently help builds; however, they can likewise become engineers following quite a while of experience.`{`1`}` Like specialists, regions where designing technologists can work incorporate item configuration (counting improvement), manufacture, and testing. Additionally, engineers build technologists once in a while, ascend to senior administration positions in industry, or become business visionaries.
Competency Demonstration Report (CDR) Sample for Engineering Technologist
The Competency Demonstration Report Sample for Engineering Technologist includes all the necessary reports such as Three Career Episodes, Continuing Professional Development, Summary Statement and Curriculum Vitae. The Content of the Sample is as follow
Engineering Technologist Career Episode Report Samples
The career episode must be written on your own based on your recent work experience and must be in the English language. Each career episode should highlight the problems faced in your project and the steps taken to overcome them. It would be best if you numbered each paragraph of your career episodes as “ Career episode 1 (paragraphs 1.1, 1.2, 1.3, etc.) “. The primary four components are as follows:
Project Name: Wave Tank- Design and Dimensioning
In first career episode, the author describes the project accomplished during the four years Bachelor degree from 2011 to 2015 on Maritime Technology. The project’s name was “Wave Tank- Design and Dimensioning”. The responsibilities of the author were:
To make a Gantt chart to plan for the starting and ending time of the activities
To construct the wave tank for the purpose of simulation
To design the wave absorber and check for its stability
To create the foundation plate for the tank to make the surface of the plate smooth
To measure of various wave parameters using sensors
Project Name:Robotic Exploration of Extreme Environments (ROBEX)
In second Career Episode, the author explains the engineering skills she used in the project she was involved in during the time January 2015 to January 2016. Her duties and responsibilities in the project “Robotic Exploration of Extreme Environments (ROBEX)” were:
To study about the influence on inductive energy of salt water and lunar regolith at positioning tolerances
To analyze the probability of using induction of power by using the coils to transfer the power in the extreme environmental conditions
To setup the experiment in order to deal the situation by varying different condition like the medium of operation and the distance between the coils used to create the magnetic field
To see the effect in the inductivity level with different materials varied upon the environment
To research about the sources of power that were being practiced when operating in the extreme environment condition
Project Name:Conception, Design and Efficiency Audit of Mechanical Processes for the Separation of Algae from Animal Tank Waters on a Technical Scale
In third Career Episode, the author demonstrates her technical skills she used to complete the project she presented as her Masters degree thesis in the period from April 2016 to November 2016. The project was “Conception, Design and Efficiency Audit of Mechanical Processes for the Separation of Algae from Animal Tank Waters on a Technical Scale”. The key responsibility of the writer was:
To find a new solution for a mechanically based water treatment plan
To determine most efficient operating parameters (centrifugation-number and centrifugation–duration) during centrifugation
To separate the solid components as well as reduce the bacteria by low-pressure ultrafiltration
To determine which method was most suitable for the separation of the algae and solids in the water of the seal basin with an allowable maximum solids content of 15 mg/L
To construct the disc separator
To determine the cost analysis report
Pricing of Complete CDR Writing
We provide Complete CDR writing service on the basis of your urgency level and prices respectively. There are currently three varients of service that you can purchase which are shown below.
15 days plan
$
799
AUD
10 days plan
$
999
AUD
7 days plan
$
1299
AUD
1000s of Satisfied Customers
Our Services receive great response and guarantee Success. Few client feedbacks are shown below.
Our Hundreds of Clients are getting Successful Approval, When will you?
Our primary goal is to ensure our clients' successful approval through well-documented CDR reports that match EA standards for migrants. CDR Writers Australia provides quality CDR and ACS skill assessment services, aiming for 100% skill assessment success.
Best Prices
On-time Delivery
Report Structure
100% Original Content
Feeling Curious? Get Your CDR Approved—Call Us Now! +61 481 614 316 / +61 483 968 416
We are here to answer all your queries and provide you the best service. Feel free to contact our writers for your concerns.
